Wednesday, June 3, 2009

Which product version do you have?

The Tivoli security products contain several components and middleware making it sometimes difficult to know exactly what versions and fix packs you are at for all of the pieces. Also, you may only need this information once in a while maybe for troubleshooting a problem or planning some upgrade or change to the environment. So you ask, "what was that command again to determine the version of TIM, TAM, WAS, TDI, etc...? And as usual for every piece of the puzzle the commands or procedure for determining the versions and fix packs are different. Then, finding this information on the IBM Support site or the Information Center for some pieces is difficult. You would think that for each product the first chapter of the Problem Determination Guide would start with "How to determine your product version and fix pack level". NOT!

I'm simply listing here the results of my hour and 1/2 of internet searches here to hopefully save time when I need this info again. There are by the way some very good IBM Wiki sites for this info. I've listed some below. It's crazy though that these Wiki's did not show up in my searches of the IBM Support site.

Check Version Info for TDS 5.2

http://www-01.ibm.com/support/docview.wss?rs=767&context=SSVJJU&q1=version&uid=swg21268258&loc=en_US&cs=utf-8&lang=en

Example:

rpm –qa | grep ldap
rpm –qa | grep db2
rpm –qa | grep gsk
ls –l /usr/ldap/bin
ibmslapd -V

If the Web Administration Tool is installed and configured please collect the output of:
ls -l /usr/ldap/idstools/IDSWebApp.war

Check for version info for TDS 6.0

http://www-01.ibm.com/support/docview.wss?rs=767&context=SSVJJU&q1=version&uid=swg21268261&loc=en_US&cs=utf-8&lang=en

Example:

rpm -qa | grep -i ldap
rpm -qa | grep -i db2
rpm -qa | grep -i gsk
ibmslapd -V
idsilist -a

If the Web Administration Tool is installed and configured collect the output from:
./opt/ibm/ldap/V6.0/idstools/deploy_IDSWebApp.sh -v

Check for version info for TDS 6.1

http://www-01.ibm.com/support/docview.wss?rs=767&context=SSVJJU&q1=version&uid=swg21268263&loc=en_US&cs=utf-8&lang=en

Example:

/opt/ibm/ldap/V6.1/bin/idsversion
rpm -qa | grep -i gsk
idsilist -a

If you are using DB2 v9.1 or higher issue the following command:
/usr/local/bin/db2ls

Otherwise issue:
rpm -qa | grep -i db2

If the Web Administration Tool is installed and configured, please collect the following:
/opt/IBM/ldap/V6.1/idstools/deploy_IDSWebApp -v

Check version of the TDS Web Admin Tool (Any version)

http://www-01.ibm.com/support/docview.wss?rs=767&context=SSVJJU&q1=version&uid=swg21320615&loc=en_US&cs=utf-8&lang=en

Check for Version of WebSphere

http://www-01.ibm.com/support/docview.wss?rs=638&context=SSPREK&q1=version&uid=swg21306756&loc=en_US&cs=utf-8&lang=en

Example:

versionInfo.sh in the app_server_root\bin directory.

Check for version info for TAMeB

http://www.ibm.com/software/info/testinfo.jsp?uid=IC000043

Example:

pdversion

Check for version info for TIM

http://www.ibm.com/developerworks/wikis/display/tivoliim/Determining+Product+Fixpack+Levels

From the TIM Admin Console, open the "About" page

Example:

Server name: secperf12
Version: 5.0.0.3
Build number: 200809241018
Maintenance level: IF0014
Build date: September 24 2008
Build time: 10:18:08 GMT-05:00

Check for version info for GSKit

http://www.ibm.com/developerworks/wikis/display/tivoliim/Determining+IBM+GSKit+Fixpack+Level

Check for version info for TDI 6.0


http://www.ibm.com/developerworks/wikis/display/tivoliim/Determining+IBM+Tivoli+Directory+Integrator+Fixpack+Level

Check for version info for TDI 6.1

http://www-01.ibm.com/support/docview.wss?uid=swg21302983

Example:

Unix/Linux -
1) cd /usr/ibm/common/acsi/bin
2) //source the setenv.sh
. /var/ibm/common/acsi/setenv.sh
3) //run the listIU.sh
./listIU.sh | grep -i tdiserversiu


Check for version info for TIM Agents


http://www-01.ibm.com/support/docview.wss?rs=644&context=SSTFWV&dc=DA420&dc=DA480&dc=DA490&dc=DA430&dc=DA410&dc=DB600&dc=DA400&dc=D600&dc=D700&d

c=DB520&dc=DB510&dc=DA500&dc=DA470&dc=DA4A20&dc=DA460&dc=DA440&dc=DB550&dc=DB560&dc=DB700&dc=DB530&dc=DA4A10&dc=DA4A30&dc=DB540&q1=version&uid=s

wg21140454&loc=en_US&cs=utf-8&lang=en


Example:

Run agentCfg -> Configuration Settings

1 comment:

Anonymous said...

I wonder just what Reva thinks with this :)